DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
Blade Ø250mm x Ø30mm x 24T
SPTSF1210-87
Spare parts can be ordered from the Special Orders Desk at
your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquires@ozito.com.au
SPARE PARTS
ADDITIONAL INFORMATION
Operating mode S6 25%: Continuous operation with idling
(cycle time 10 minutes). To ensure that the motor does not
become excessively hot it may only be operated for 25% of
the cycle at the specified rating and must then be allowed
to idle for 75% of the cycle.
V
Volts
Hz
~
Alternating current
W
/min
Revolutions or
reciprocation per minute
Regulator compliance mark
n
o
Warning
Danger! Keep hands away
from blades
Read instruction manual
Wear eye protection
Wear hearing protection
Wear safety gloves
Wear breathing protection
Hertz
Watts
No load speed
Double insulated
8. TABLE INSERT
1 To prevent increased likelihood
of injury the table insert should
be changed whenever it is
worn or damaged.
2 Lower the blade then remove
the blade guard.
Changing the table insert
3 Remove the countersunk head
screw.
4 Take out the worn table insert.
5 To fit the replacement table
insert, proceed in reverse
order.
