Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your local
council authority for recycling advice.
CARING FOR THE ENVIRONMENT
MAINTENANCE
DESCRIPTION OF SYMBOLS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquiries@ozito.com.au
SPARE PARTS
•
When not in use, the staple nail gun should be stored in a dry,
frost free location, keep out of children’s reach.
•
If the housing of the staple nail gun requires cleaning, do not
use solvents. Use of a cloth only is recommended. Never im-
merse any part of the staple nail gun into liquid.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repair of the staple nail gun by an unauthorised
person or by mishandling.
Staples
Common Applications for Staple Length
5/16”
(8mm)
Insulation, Upholstery, Weather Stripping, Wall
Decorations, Crafts, Covering Cornices, Webbing,
Light Fabrics.
3/8”
(10mm)
Insulation, Carpeting, Wire Mesh, Plastic or
Canvas Coverings, Roofing Paper, Felt Stripping,
Weather Stripping.
Nails
Common applications: C1 Brads
9/16”
(15mm)
Trim Moulding, Panelling, Picture Frames, Model
Work, Any Finish Nailing Application.
10
14
16
Width
10.6mm
Depth
1.25mm
0.6mm
Front View
Side View
Width
2mm
Front View
15
0.85mm
8 - 16mm
15mm
12
8
18 GAUGE T50 STAPLE SIZE
18 GAUGE C1 BRAD NAIL SIZE
10
14
16
Width
10.6mm
Depth
1.25mm
0.6mm
Front View
Side View
Width
2mm
Front View
15
0.85mm
8 - 16mm
15mm
12
8
This tool accepts staples with the measurements below:
Accessories to suit this Staple Nail Gun can be purchased from
Bunnings Warehouse.
This tool accepts nails with the measurements below:
STAPLE/ NAIL SELECTION
Warning
Read instruction manual
ø
Diameter
mA
Milliamperes
Double insulated
Ah
Amp hour
Regulator compliance
mark (RCM)
V
Volts
Hz
Hertz
ac/~
Alternating current
W
Watts
Direct current
dc/
