background image

3

release

of liability

ozone kitesurf ltd / ozone kites ltd release of liability, 

claiM waVier, assuMPtion of risk

By assembling and/or using this Ozone product, you agree that you have read and understood the entire Ozone 

product owners manual, including all instructions and warnings contained in that manual, prior to using the Ozone 

product in any way. You additionally agree that you will ensure any additional or subsequent user of your Ozone 

product will read and understand the entire Ozone product owners manual, including all instructions and warnings 

contained in that manual, prior to allowing that person to use your Ozone product.

assuMPtion of risk

 

Use of the Ozone product and any of its components involve certain risks, dangers, and hazards which can result 

in serious personal injury and death to both the user and to non-user third parties. In using this Ozone product, you 

freely agree to assume and accept any and all known and unknown risks of injury to you and third parties while 

using this equipment. The risks inherent in this sport can be greatly reduced by abiding by the warning guidelines 

listed in this owner manual and by using common sense.

release and waiVer of claiMs

 

In consideration of the sale of the Ozone product to you, you herby agree to the fullest extent permitted by law, as 

follows;

TO WAIVE ANY AND ALL CLAIMS that you have or may in the future have against Ozone Kitesurf LTD or Ozone 

Kites LTD and all related parties resulting from use of the Ozone product and any of its components.

TO RELEASE Ozone Kitesurf LTD or Ozone Kites LTD and all related parties from any and all liability for any loss, 

damage, injury or expense that you or any users of you Ozone product may suffer, or that your next of kin may 

suffer, as a result of the use of the Ozone product, due to any cause whatsoever, including negligence or breach of 

contract on the part of Ozone Kitesurf LTD or Ozone Kites LTD and all related parties in the design or manufacture 

of the Ozone product and any of its components.

In the event of your death or incapacity, all provisions contained herein shall be effective and binding upon your 

heirs, next of kin, executors, administrators, assigns, and representatives. Ozone Kitesurf LTD or Ozone Kites LTD 

related parties have not made and expressly deny and oral or written representations other than what is set forth 

herein and the Ozone product owners manual.

warranty

ozone warrants tHis Product according to tHe laws 

in force against any Major Manufacturing defect. tHis 

warranty is subject to tHe following liMitations:

•  The warranty is valid only when the product is used for its intended use, and does not cover products used in 

rental or teaching operations.

•  Ozone will make the final warranty determination, which may require inspection and/or photos of the equipment, 

which clearly show the defect(s). If necessary, this information must be sent to the Ozone dealer, postage prepaid.

•  If a product is deemed to be defective by Ozone, the warranty covers the repair or replacement of the defective 

product only. 

•  Ozone will not be responsible for any costs, losses, or damages incurred as a result of loss of use of this product. 

The warranty does not cover damage caused by misuse, abuse, neglect or normal wear and tear including but 

not limited to; assembling with other than Ozone components, damage due to excessive sun exposure, damage 

caused by improper handling or storage, and damage caused by anything other than defects in material and 

workmanship.

•  This warranty is voided if any unauthorized repair, change or modification has been made to any part of the 

equipment. The warranty for any repaired or replaced equipment is good from the date of the original purchase 

only. The original purchase receipt must accompany all warranty claims.

•  The name of the retailer and date of purchase must be clear and legible.

•  There are no warranties that extend beyond the warranty specified herein.

warranty claiMs

 

•  Warranty claims must be sent to Ozone by an official Ozone dealer or country distributor.

•  Warranty claims must be processed and be issued a return authorization prior to shipping to the Ozone dealer the 

product was purchased from.

Summary of Contents for Hyperlink V3

























Reviews: