background image

5

warninGs & safety PreCaUtions

cHoose safe weatHer conditions and locations:

 
•   Be aware of the general risks associated with action sports.
•   Ensure you understand all weather forecasts and prepare for changes in weather.
•   Never learn to use this product in more than 10 knots of wind. 
•   We highly recommend you purchase a wind speed indicator to be able to measure wind speeds. Study 

the wind guide to understand wind speeds.

•   Never use this product in high winds.
•   Never use this product in thunderstorm and lightning conditions.
•   Only use this product when you can remain in a standing position.
•   Never use this product in wind conditions that are above your ability level.
•   Never use this product near or on the water in offshore wind condition unless you are an expert swimmer.

•   Always observe local rules and regulations when using this product.
•   Never use this product near power lines, telephone poles, trees, bushes, roads, automobiles or airports.
•   Only use this product when you have at least 100m of clear space downwind, and on both sides of your 

launching position. The power of the kite can pull you downwind unexpectedly with great force.

•   Do not fly your kite over other people or pets. Spectators should remain upwind of you when using this 

product.

•   Never use this product on crowded beaches or fields.
•   Practice launching and landing procedures, and self rescue techniques before using this product near 

the water.

Summary of Contents for Hyperlink V3

























Reviews: