background image

12

p u r e   M a n u a l

1

st 

fly  

OpTION 1 – AssIsTed lANdINg: 

•  Fly the kite to the edge of the window and lower it gently and controlled.

• Have an assistant catch and take control of the kite.

• Run towards the kite to take all tension from the lines.

• Place snow on the wing tip to hold it down.

 

 

                 3

lANdINg

 

 

                2 

 

 

                 4

warning: 

  

Never fly your kite in strong wind for the 1st time. do not attempt to 

fly a kite without being taught by a certified kite instructor.

strong winDs

1  

1  

 

 

                 3

If the wind is light (less than 12 kph) lay trailing 

edge directly into the wind with snow/weight 

along the trailing edge to secure the kite. 

Connect the Quick Release and Kite Leash. 

Place yourself directly in front of the kite. Step 

backwards while pushing the bar forward. 

The kite will inflate and take off. In light winds, 

to assist launching, gently grab and pull on 

the front lines.

If the wind is strong (more than 12 kph), lay 

the kite directly downwind with snow/weight 

securing the upwind tip. Connect the Quick 

Release and Kite Leash. Place yourself at 45 deg 

to the kite upwind. Step backwards while gently 

pulling the down wind side of the bar to ease kite 

into the air. Allow the kite to inflate and then steer 

up off the ground. Keep it low at the side of the 

wind window.

wINd

lIghT wINds

Summary of Contents for Pure V1

















Reviews: