4
GPT3G003 OzSpy User Manual
2.
This tracker uses a micro SIM card (bigger than SIM card used in iPhone 5/6), please
see the following diagram.
3.
Power ON / OFF
Press the “ON/OFF” button till the Green/Red LED is ON, then release the button, the
tracker is powered ON, when the LED flash’s it means the tracker is working well.Press the
“ON/OFF” button till the all the LED turn off, then release the button, the tracker is powered
OFF.
4.
Battery Low Alarm
When the battery voltage in the tracker is too low, the tracker green LED will flash 3 or 4
times, and send battery low alarm information to the authorized number, if the battery power
is too low, it will power off automatically.
5.
Back to Factory Setting (Default Setting)
Sending SMS “FACTORY*123456” to the tracker SIM card number, the tracker will delete all
the user settings (authorized number / Alarm setting / Password / APN / Working mode etc.),
and reset to factory default setting. Before power on, press the button B and C
simultaneously,
then power on. After the GREEN led flashes for 5 seconds, release the button, then the unit
will re-power on, and reset to factory.
Antenna
The Antenna is built in the tracker. Please keep the tracker away from large amounts of
metal, this will reduce the GSMWCDMA or GPS signal.