5
GPT3G003 OzSpy User Manual
Simple Step by Step Use
1.
First buy a 3G WCDMA mobile phone SIM card and enable data service, order a data
package (Normally will use about 10M-30M GPRS data every month), install in the tracker,
please refer the above
Before Using 1.
2.
Press ON/OFF button till the tracker powers on.
3.
Send SMS - URL*123456 to the tracker, a few minutes later, the tracker will send you it’s
location with a Google map link by SMS. Please refer to the following
Locate Operation &
Setting 5.
4.
This tracker’s default working mode is 1, the tracker locating & uploading is controlled
by shock sensor, if the tracker is moving, the tracker will upload the location to server every 5
minutes (time interval can be set, please refer
Locate Operation & Setting 6
), if the tracker
stop’s moving, 2 minutes later, the tracker will stop locating & uploading location to server. 5
different geo-fence in or out alarm can be set, the alarm information will be sent to user by
SMS, the battery working time can reach up to 2-5 days at this working mode.
5.
In the default working mode 1, if the user needs the tracker to stop locating & uploading
location to server, user can send SMS (SLEEPON*123456*0*24) to make the tracker go into
sleep mode, then only SMS and calling can trigger the tracker locate & uploading location by
GPRS or SMS, the tracker will not locate & upload location any more unless user turn off the
sleep mode by sending SMS “SLEEPOFF*123456” to tracker.
6.
If the tracker is used for tracking express goods, working mode can be set to 3, and the
power on off time interval can be set, at this status, the tracker will power on every setting time
(for example every 2 hours) & locate and upload location to server, and then auto power off to
wait for another power on. The working mode can be changed, please refer the following
Locate Operation & Setting 5.
7.
Visit & login to the tracking platform
, for a display of current location,
playback history, tracking etc. can be operated, platform user name and password is the last 7
digital numbers of the tracker’s ID (the ID is printed on the battery, for example ID is :
620201412345678, and then the user name is : 2345678, password is :2345678 or 123456, user
can change the password).
8.
iPhone Android App also use the same user name and password with website login, for
