6
Figure 3
Figure 5
Figure 4
Fasteners included with struts
Fasteners included – 4 x 25/8mm hex-head
bolts, 2 x 35/8mm dome-head bolts, 6 x
15/8mm gripper washers, 10 x 15/8mm
washers, 2 x 30/8mm washers, 6 x 13/8mm anti-
slip nut with nylon insert.
Fasteners included – 1 x 35/8mm dome-head
bolts, 1 x 15/8mm gripper washers, 1 x 30/8mm
washers, 1 x 15/8mm washers, 1 x 13/8mm anti-
slip nut with nylon insert, 1 x 20mm screw.
HELPFUL HINT
The mounting bracket has been designed
to either fit on flat metal or metal with
corrugations. The bracket spans most
corrugations. The latch can be locked with
a padlock. Please note, padlocks are not
included.
Figure 6
N.B. The bigger holes on
one side are for the gas
strut fittings.
;
2 x Catch Hook for Clamping
Latch, See Figure 3.
;
2 x Large Gas Strut to lift the
entire base-board, See Figure 5.
;
4 x Angle mounting brackets, See
Figure 6.
;
2 x Stainless Steel Hinge mounted
on bracket, See Figure 4.
