0
Step 1
Release guy ropes.
Step 2
Unzip doors and windows and collapse the tent, removing and disassembling the
poles. Place the poles in the pole carry bag and tie shut.
Step 3
Remove pegs.
Do not remove pegs from the ground by pulling on peg loops.
This may cause the peg loops to tear out of the seam.
Step 4
Spread the tent out flat with all loose fabric within the edges of the tent base.
Try to flatten the tent as much as possible.
Step 5
Fold the tent in half, third or quarters.
The folded tent should be the width of the pole bag.
Step 6
Beginning at the back end, roll your tent tightly, forcing out excess air as you roll.
Keep tent edges straight as you roll.
Step 7
When tent is rolled up, tie straps around it and place into tent carry bag with peg
bag, instruction sheet, and other miscellaneous parts. If tent won’t fit into bag, unroll
and reroll more tightly.
Important
Do not store your tent away wet, damp or dirty. If you have no choice but to return
home from your camping trip with a wet, damp or dirty tent, make sure you lay it out
to air in a cool, dry and shaded place and only pack it away when it is completely dry
and clean.
DISASSEMBLY INSTRUCTIONS
Do not remove pegs from the ground by pulling on peg loops.
This may cause the peg loops to tear out of the seam.
