Thank you for purchasing a superior quality
OZtrail tent. This trouble shooting guide is
designed to give you years of fun & enjoyment
from your camping equipment.
HELPFUL HINTS GUIDE
Condensation
- this is caused by lower temperatures on the outside of the tent com-
bined with body heat on the inside of the tent. When this occurs, avoid touching walls to reduce
contact leakage. Leaving the doors and windows open will reduce moisture condensation.
Seam leakage
- all OZtrail tents are manufactured by expert machinists. However,
seepage may occur in the seams through the needle holes created in the sewing process. This
is normal and can be corrected by applying a generous amount of seam sealer or wax on the
inside of the seams. Seam sealer is available at all retail camping specialists.
Mildew
- to avoid mildew, never put your tent away wet or damp. However, if mildew
occurs, use a soft bristle brush or sponge with mild detergent to clean. Let the tent dry in the
sunlight and re-apply seam sealer compound on the inside of the seams.
Repairing a tear
- for small tears, use a self-adhesive patch kit. We recommend a
canvas or awning repairer for larger tears.
Faulty zipper
- all our tents are manufactured with zippers which, if the zipper sepa-
rates, you can fix the zipper by moving the slider to the beginning of the zipper tape and rework-
ing the zipper. If this doesn’t work, we recommend you visit a canvas or awning repairer in your
area.
Fading fabric
- do not leave your tent set up in direct sunlight longer than is necessary.
If left in sunlight for prolonged periods of time, fabric will fade and weaken.
Floor condensation
- a ground sheet under the tent prevents the floor from feeling
damp and helps prolong its life. The ground sheet should be smaller than the tent’s floor to
prevent rain from running under the tent.
Shock cord failure
- spring and elastic shock cord is provided to assist tent assem-
bly. Age, over stretching and mishandling pole assembly will cause elastic failure. Elastic shock
cord is delicate and should be handled with care.
Removing pegs
- pegs should be pulled with another peg, hammer or a peg puller,
never by pulling on the tent. Avoid pegging tent so tight that it stretches the fabric. Overstretch-
ing may cause peg loops to tear.
