Page | 2
READ ALL OF THE INSTRUCTIONS INCLUDED IN THIS MANUAL
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operation and maintenance instructions.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
1.
The following safety notices must be read and adhered to for safe operation of the SB-218.
2.
Copies of this manual should be retained by the system’s installer AND end-user.
3.
This manual must be read and understood and ALL warnings must be followed.
4.
Follow all instructions to insure optimal product performance.
5.
The SB-218 is a convection-cooled device and requires at least 6 inches (152 mm) of clearance behind
the enclosure to allow the heat sink to adequately cool the internal electronics.
6.
DO NOT INSTALL NEAR ANY HEAT SOURCES!
7.
Use ONLY the supplied AC Mains connector.
8.
Protect the AC Mains power cord from being walked on or otherwise damaged and inspect for
damaged connections and damaged insulation.
9.
The SB-218 may NOT be suspended. Do not attempt suspension from the enclosure handles.
10.
For safety reasons, do not place one loudspeaker on top of another without proper fastening systems.
11.
Ensure the loudspeaker is securely installed in a stable position to avoid any injuries or damages to
persons or properties.
12.
The SB-218 is not designed for permanent outdoor use. Ensure precautions are taken to protect the
electronics from moisture in outdoor environments!
13.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the apparatus.
14.
This equipment must be supplied from a power system providing a PROTECTIVE EARTH Connection
and having a neutral connection, which can be reliable identified.
15.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
16.
The AC inlet is used as the disconnect device and shall remain readily operable.
17.
No naked flame sources, such as lighted candles, should be placed on the apparatus
EMI CLASSIFICATION FCC CLASS B STATEMENT ACCORDING TO TITLE 47, CHAPTER I, SUBCHAPTER A, PART
15, SUBPART B According to the standards EN 55103 this equipment is designed and suitable to operate in E3
(or lower E2, E1) Electromagnetic environments.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
