Instruction Manual
Updated11/2013
10
| 24
4.5 communication via eWs box
The communication of the Wallbox Duo with the electric vehicle takes place
via the integrated Schletter EWS Box P. The EWS Box P communication module
undertakes all control and signaling functions necessary, in accordance with
IEC 61851-1 Mode 3, for the connection of an electric vehicle (EV) to a cable-
linked supply unit (EVSE). Parameters for a self-sufficient or for a systems-
integrated operation can be configured via HTML pages. The RFID cards can be
activated or blocked on this HTML page. For more information, please refer to
the Schletter GmbH website, especially to the links specified under 10. Links
for support.
4.6. technical Data (inDepenDent of variant)
color schemes
•
Body RAL 9003
•
Housing coating RAL 9003
•
Front housing / facing RAL 6018
•
Custom color schemes on request
Dimensions / Weight
•
W / H / D: approx. 700 x 335 x 170 mm
•
Weight (variant specific): approx. 17 kg
installation anD assembly
•
Wall mounting
•
Recommended installation height: 1300 mm (above top ground surface)
•
On-wall and in-wall cable routing
•
Suitable for interior and exterior locations
electrotechnical Data
•
Nominal power configurable: 10A, 13A, 16A, 20A, 32A
•
Mains frequency: 50 Hz
•
Nominal voltage: 230/400V AC
•
Terminal clamps: 10mm² (L1, L2, L3, N, PE)
•
Overvoltage category III
•
Possible integration of customer-installed ventilation system
•
Charging mode in accordance with IEC 61851-1 (Mode 3)
•
Ethernet connection (RJ45)
•
Charging capacity per charging outlet: 11kW (max. 2 x 11kW possible)
•
Fault current protection
RCBO Type A, C Characteristic,
with over-current release
Rated residual current IΔn 30 mA
•
Installation contactor
Rated operating voltage 440V
Rated operational current 24A
•
Energy meter pulse counter Alternating current 3 x 65 A, 1000 impulse/kWh,
with S0 interface
Accuracy class 1/B
•
Power supply/control voltage Output voltage 12V / nominal power 36W
