P.I.T. PMIG145-C1, Instruction Manual

Automatic Welding Machine

13

circuit boards;
- if a Warranty Certi

fi

 cate or a Warranty Card 

does not correspond to this electric machine 
or to the form established by the supplier;
- upon expiration of the warranty period;
- at attempts of opening or repair of the elec-
tric machine outside the warranty workshop; 
making constructive changes and lubrication 
of the tool during the warranty period, as ev-
idenced, for example, by the creases on the 
spline parts of the fasteners of non-rotational 
parts.
- when using electric tools for production or 
other purposes connected with making a prof-
it, as well as in case of malfunctions related 
to instability of the power network parameters 
exceeding the norms established by GOST;
- in the events of improper operation (use the 
electric machine for other than intended pur-
poses, attachments to the electric machine of 
attachments, accessories, etc. not provided 
by the manufacturer);
- with mechanical damage to the case, pow-
er cord and in case of damages caused by 
aggressive agents and high and low tempera-
tures, ingress of foreign objects in the ven-
tilation grids of the electric machine, as well 
as in case of damage resulting from improper 
storage (corrosion of metal parts);
- natural wear and tear on the parts of the 
electric machine, as a result of long-term op-
eration (determined on the basis of the signs 
of full or partial depletion of the specified 
mean life, great contamination, presence of 
rust outside and inside the electric machine, 
waste lubricant in the gearbox); 
- use of the tool the purposes for other than 
speci

fi

 ed in the operating instructions.

- mechanical damages to the tool;
- in the event of damages due to non-obser-
vance of the operating conditions speci

fi

 ed  in 

the instruction (see chapter “Safety Precau-
tions” of the Manual).
- damage to the product due to non-obser-
vance of the rules of storage and transporta-
tion.
- in case of strong internal contamination of 
the tool.
Preventive maintenance of electric machines 
(cleaning, washing, lubrication, replacement 
of anthers, piston and sealing rings) during 
the warranty period is a paid service.
The service life of the product is 3 years. Shelf 
life is 2 years. It is not recommended for oper-
ation after 2 years of storage from the date of 
manufacture, which is indicated in the serial 

number on the label of the instrument, without 
preliminary veri

fi

 cation (for the de

fi

 nition of the 

date of manufacture, see the User’s Manual 
earlier).
The owner is notified of any possible viola-
tions of the above terms of wa rranty service 
upon completion of diagnostics in the service 
center.
The owner of the tool entrusts the diagnostic 
procedure to be conducted in the service cen-
ter in his absence.
Do not operate the electric machine when 
there are signs of excessive heat, sparking, or 
noise in the gearbox. To determine the cause 
of the malfunction, the buyer should contact 
the warranty service center.
Malfunctions caused by late replacement of 
carbon brushes of the engine are eliminated 
at the expense of the buyer.
5. The warranty does not cover:
- replacement accessories (accessories and 
components), for example: batteries, discs, 
blades, drill bits, borers, chucks, chains, 
sprockets, collet clamps, guide rails, tension 
and fastening elements, trimming device 
heads, base of grinding and belt sander ma-
chines, hexagonal heads, etc., 
- fast wearing parts, for example: carbon 
brushes, drive belts, seals, protective covers, 
guiding rollers, guides, rubber seals, bear-
ings, toothed belts and wheels, shanks, brake 
belts, starter ratchets and ropes, piston rings, 
etc. Their replacement during the warranty 
period is a paid service;
- power cords, in case of damage to the insu-
lation, power cords are subject to mandatory 
replacement without the consent of the owner 
(paid service); 
- tool case.