P.I.T. PSB13-C5, User Manual

EXPLANATION OF P.I.T. TRADEMARK

P.I.T. Progressive Innovational Technology
Currently, 10 kinds of mechanical and electrical equipment are produced under the P.I.T. trademark. In terms of 
sales, impact drills occupy one of the leading positions.
Each letter and number in the designation of the model of P.I.T impact drills has the meaning.
For example, 

PBS13-C5

P

-Trademark of P.I.T.

SB

- impact drill

13 

- diameter of the chuck

C5

- modification series

INTENDED USE

The impact drill has a universal purpose for operation with various materials: as with concrete and stone, and 
with metal, wood, plastic, etc. Such an option is provided by the function of a disabled impact, without which it 
would be problematic to operate with materials such as concrete or brick.
The tool is used only for drilling bores and operates in two modes: drilling without impact and drilling with impact.

PRINCIPLE OF OPERATION

The impact drill from the drive mechanism transfers reciprocating impact forces to the drill bit, which performs 
rotational motion and produces impacts simultaneously. The impact mechanism of the drill is of two types: gear 
and ball type.
The toothed gear mechanism consists of a moving and a fixed disk. The moving disk is connected to the main 
shaft via a gear wheel. The fixed disc is attached inside the aluminum socket. During operation, back-blow is 
achieved by clutching the upper and lower teeth. A drill made from diamond substitute performs rotational and 
percussive movements, which allows drilling bores in bricks, blocks, concrete and other brittle-acting materials. 
When the functional key is released, the upper and lower teeth do not clutch, thereby not producing impacts. In 
this case, the tool can be used as an ordinary drill. 

SPECIFICATIONS

FUNCTIONAL CAPABILITIES AND FEATURES 

Functional Capabilities:
With the help of the impact drill, drilling bores in a brick, concrete, stone is also suitable for drilling metal, plastic, 
wood and other similar materials.
The impact drill is equipped with an electronic speed controller, a function of changing the direction of the drilling 
rotation. The tool has a microswitch of rotation speed from 0 to 3000 rpm, as well as a mechanism for monitoring 
the rotation direction for unscrewing and screwing of screws and for thread forming. 
Features:
1. High power of the electromotor.
2. Timely implementation of the fan heat dissipation generated by the motor during operation, thereby achieving 
a high cooling effect of the tool.

2

PSB13 - C5 

Rated voltage 

220 V 

Rated frequency 

50 Hz 

Chuck 

13 mm 

Drill bit diameter 

1.5 -13 mm

No-load speed 

0-3000rpm  

Rated output capacity

950 W

Weight  

2.4 kg.

impact drill