P.I.T. PTIG200-C, Operation Manual

Argon / Arc Welding Machine

6

clean it and reconnect it 

fi

 rmly.

►

Do not allow water and steam to enter 
the interior of the welding machine.

 If 

this happens, dry it and check the insula-
tion of the apparatus.

►

If the welding machine will not be used 
for a long time, it must be placed in the 
packing box and stored in a dry and 
clean place.

In order to avoid safety hazards, if the power 
supply cord needs to be replaced, this must 
be done by P.I.T. or by an after-sales service 
center that is authorised to repair P.I.T. power 
tools.  

Service

►

Have your power tool repaired only by 
qualified personnel and only with original 
spare parts. This ensures the safety of the 
power tool.

The list of authorized service centers can be 
viewed on the of

fi

 cial website of P.I.T. by the 

link: https://pittools.ru/servises/

Storage and transportation

The welding machine should be stored in 
closed rooms with natural ventilation at tem-
peratures from 0 to +40 ° C and relative hu-
midity up to 80%. The presence of vapors of 
acids, alkalis and other aggressive impurities 
in the air is not allowed.
Products can be transported by any type of 
closed transport in the manufacturer’s pack-
aging or without it, while preserving the prod-
uct from mechanical damage, atmospheric 
precipitation.

Dispose of waste

Damaged power tools, batteries, ac-
cessories and waste packaging materi-
als must be recycled and reused in an 

environmentally friendly manner.
Do not throw power tools and accumulators / 
batteries into general household waste!

Product serial number interpreta-
tion serial number

The 

fi

 rst and second digits of the product seri-

al number from left to right
Year of production, the third and fourth digits 
indicate the month of production.
The 

fi

 fth and sixth digits indicate the produc-

tion day.