21
MAN 9036773 EN V5
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
e-mail: salg@p-lindberg.dk
Start-up
•
Lubricate the three bearings on the blade axles
before taking into use.
•
Check the oil level before starting the engine.
•
Open the fuel valve.
•
Push the engine throttle all the way forward (activate the
choker at full throttle).
•
Start the engine using the key (never stand behind the
machine because of the ejection).
•
When the machine starts, slowly reduce the throttle. Let
the machine idle for a few minutes to warm up before
use.
•
After the engine has warmed up, apply full throttle
(approx. ¾ on the throttle) and the machine is ready to
use.
CAUTION
The “ON” switch cannot be in START position for more than 5 seconds.
Always turn the fuel valve off once the engine is stopped.
Always ensure the ON/OFF switch is in the OFF position after using the mower.
Stop Mowing
1.
Bring tow vehicle to a complete stop, shut off vehicle engine, turn fuel value to the off
position and set parking brake.
2.
Shut mower engine off by manually turning toggle switch and/or key switch to the
“OFF” position.
3.
Turn mower engine fuel valve to the off position.
4.
Remove the key.
