5
MAN 9044246 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: salg@p-lindberg.dk
Inserting the grease cartridge:
Loosen the cartridge case to avoid a vacuum when
the piston rod is pulled back.
Pull the piston right back with the drawbar.
Remove the plastic cap from the grease cartridge
and insert the cartridge in the case.
Remove the pull pin from the grease cartridge. Fit
the cartridge case on the grease gun again.
Activate the locking pin and push the drawbar into
the case.
Any air from the cartridge can be removed by
opening the vent valve 3–4 turns until the grease
comes out.
