10
MAN 9052454 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: salg@p-lindberg.dk
Service and maintenance of the post driver
The petrol-driven post driver is manufactured and designed to provide many years of
problem-free operation. Always ensure that the post driver is stored properly. Never
rest the post driver horizontally on its side or resting on the engine. It is
recommended that it is stored horizontally. If this is not possible, position it on a level
surface with the cylinder and tank guard as support at an angle, so that the top
handle is the highest point.
Every time
1.
Check the engine’s oil level and maintain the machine in an upright position. If you lie
the machine down, it will show an incorrect reading. Use SAE 10W-30 as a supplement,
if required.
2.
Check the engine’s air filter; if it is very soiled, clean or replace.
3.
Check all of the post driver’s fittings and tighten if necessary. If bolts are fitted with
new thread lock, the bolt and the area around the bolt entry must be cleaned using a
degreasing agent to remove all of the lubricant remnants, If there are remnants of
lubricant the thread lock will not work.
4.
Inspect the cylinder and driver for deposits and foreign bodies.
5.
Check for fuel leaks.
After 10 hours of operation
1.
Change the engine oil. Dispose of the old oil in accordance with local guidelines.
2.
Important! Do not overfill. Always check the oil level while the machine is in the
vertical position.
3.
Check all of the engine and post driver’s bolts and tighten if necessary. Replace
or re-fit bolts with new thread lock. Follow the above guidelines relating to
thread lock.
After three months or 25 hours of operation
1.
Change the engine oil. Dispose of the old oil in accordance with local guidelines.
Do not overfill!
2.
Replace the air cleaner elements. This must be carried out more often if the
post driver is used in dusty conditions.
3.
Check all of the engine and post driver’s bolts and tighten if necessary. Replace
or re-fit bolts with new thread lock. Follow the above guidelines relating to
thread lock.
Summary of Contents for 9052454
Page 2: ......
