4
MAN 9056555 EN V3
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: salg@p-lindberg.dk
Safety instructions
The user manual cannot cover all conceivable situations and therefore it is important
that you use common sense and are careful and cautious when handling the
machine. The machine may only be used by persons who are physically capable of
using the machine and who have read and understood the user manual.
The warranty will be void in case of damage due to not following the instructions,
incorrect use or if alterations were made to the machine.
Safety instructions
Always make sure you read and understand all safety instructions.
The machine may only be used by persons over 18 years of age.
If other work is to be carried out near the machine, always switch off the
engine and wait until all moving parts have stopped. Always switch off the
machine if it to be left unattended.
The machine must be inspected thoroughly before putting into operation.
Check the machine’s parts (especially mechanical parts and guards) for
damage and loose bolts. Defects and deficiencies must be rectified
immediately. Use only original spare parts.
Before the work begins, the work area must be cleared of any foreign objects,
e.g. stone, wire, construction materials etc. that could be ejected by the
machine or which could damage the machine. If these cannot be removed,
avoid working in the area in question.
The machine consists of rotating parts. Ensure that there are no other
persons present in the working area. Keep other people at a safe distance to
avoid the risk of being struck by cut material or by other ejected materials.
In regard to exceeding the recommended values for noise and vibrations, the
following instructions must be followed when working with the machine:
a)
Wear ear defenders
b)
Do not operate the machine for more than 20 minutes at a time. Take breaks of at
least 10 minutes. While taking a break, the user must not expose himself/herself to
