25
MAN 9058167 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: salg@p-lindberg.dk
7.
Turn the knob on the pressure control anti-clockwise to the Prime/Clean setting.
8.
Turn the Prime/Spray valve down to
PRIME.
9.
Set the ON/OFF switch to ON.
10.
Flush until approximately one third of
the cleaning fluid is sucked up by the
bucket.
11.
Set the ON/OFF switch to OFF.
Note: Perform step 12 to drain paint from the hose down into the paint bucket.
A 15-metre hose contains approximately 1 litre of paint.
