26
MAN 9058167 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: salg@p-lindberg.dk
12.
In order to drain paint from the hose, aim the gun down into the paint bucket while
holding the gun firmly against the bucket.
a)
Loosen the locking pin.
b)
Pull and hold the trigger.
c)
Turn the Prime/Spray valve horizontally to the SPRAY position.
d)
Continue to hold the trigger until you see the paint diluted with cleaning fluid come out
of the gun.
13.
While still holding the trigger, move the gun into the waste bucket. Continue to release
the gun down into the waste bucket until the cleaning fluid that comes out is relatively
clear.
14.
Set the pressure to the lowest setting.
15.
Release the trigger and lock it. Set the Prime/Spray valve to the PRIME position.
16.
Set the ON/OFF switch to OFF.
