15
MAN 9059890 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: salg@p-lindberg.dk
Maintenance schedule
Task
Service
Interval
Hydraulic oil level*
Check.
Daily/After 10 hours of use
Hydraulic oil/filter
Replace
As specified in the tractor’s
manual.
Tyre pressure
Check.
Daily/After 50 hours of use
The backhoe turning points
Lubricate
Daily/After 10 hours of use
Hydraulic system:
Hoses and connections
Cylinders
Inspect for leaks and wear
Daily/After 10 hours of use
Pivot bolts and dust cover
Check, replace if there are
defects
Daily/After 10 hours of use
Pins
Check, replace as necessary
Daily/After 10 hours of use
The backhoe mounting parts Check visually
Daily/After 10 hours of use
Bolts and nuts
Tighten
After 25 hours of use
*When checking the hydraulic oil, the backhoe arm must be lowered to the ground
and the bucket must be turned inwards – in this position all of the cylinders in the
retracted position.
IMPORTANT – Always lower the backhoe arm to the ground and remove the pressure
in the hydraulic system before carrying out any form of service or maintenance on the
tractor or backhoe.
Summary of Contents for 9059890
Page 2: ......