6
MAN 9061374 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tlf: 70212626
DK-6600 Vejen
e-mail: salg@p-lindberg.dk
WORKING WITH THE SHREDDER
Safety and technical remarks
1.
The user should be 18 years old or more.
2.
The machine should be positioned on a horizontal
,
firm surface
.
3.
Users must wear safety gloves
,
ear-protection and safety goggles.
(fig
.
4)
4.
When working in a confined space
,
always make sure there is sufficient ventilation
and lighting
,
in order to reduce the risk of suffocation and injury
.
5.
Only one person at a time should operate the machine.
6.
Pieces jamming the input tube can only be removed safely when the engine is
stopped
,
the spark plug cap removed and the rotor is stopped and blocked. lf
necessary, unbolt and tip the input and output tubes to facilitate access to the
rotor. Use a wooden pole to remove pieces stuck in the rotor. Never use your
hands.
(fig
.
6
-
8)
7.
Never leave the machine running unattended.
8.
Changing the blades of the rotor or the counter blade and checking blade bolts
should only be done when the engine and rotor are stopped
,
the spark plug cap is
removed and the rotor is blocked.
9.
After one hour of use always check that all bolts and nuts are still tightened
properly. lf not, tighten them again
!
