10
MAN 9061374 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tlf: 70212626
DK-6600 Vejen
e-mail: salg@p-lindberg.dk
Transportation
Befo
re moving the machine, stop the engine!
MAINTENANCE AND CHECKS
All technical check-ups and maintenance should be done with the engine shut off
and the spark plug cap removed from the spark plug
.
While cleaning the shredder, never spray the bearings with a
high-pressure
washer! It could cause water to enter the bearings which will cause damage to the
machine; (this is not covered by warranty).
The two grease nipples on the rotor require lubricating once a year or every 500
hours.
Before putting the shredder into storage grease or oil the bearings
,
blades and
rotor to protect against corrosion.
Note that the first engine oil change is after 5 hours use.
