14
MAN 9063771 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: salg@p-lindberg.dk
Cleaning and adjustment of spark plug
•
Starting failure and misfiring are often caused by a fouled spark plug. Periodically clean
the spark plug and check that the spark gap is in the correct range.
•
When you take off the spark plug, twist and pull off the cap.
IMPORTANT
•
Note that using any spark plugs other than those designated may result in the engine
failing to operate properly or in the engine becoming overheated and damaged.
•
To install the spark plug, first turn the plug until it is finger tight, then tighten it a
quarter turn more with a socket wrench.
TIGHTENING TORQUE: 9.8~11.8 N.m
Lubrication of the gear case
Supply multi-purpose grease at every 25 hours of use.
1.
Use a grease pump.
2.
Feed grease until it comes out of the base of blades(a).
