7
MAN 9060917 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: salg@p-lindberg.dk
Electromagnetic fields
WARNING
•
Electromagnetic fields can affect electrical and electronic equipment, e.g.
pacemakers.
•
Contact your doctor before you use the arc welder or cutting equipment.
•
Keep people with pacemakers at a safe distance in the area where welding shall take
place.
•
Never allow the cable to wind around the body when welding.
Containers with shielding gas can explode
WARNING
Pressurised cylinders can explode if damaged, so exercise extreme caution.
•
Do not expose the cylinders to high heat, embers, sparks or open flames, mechanical
effects or welding arcs.
•
Do not touch the cylinder with the MIG gun.
•
Do not weld on the cylinder.
•
Always secure the cylinder in an upright position in a trolley or in a secure stationary
position.
•
Always use the correct regulators, gas hoses and fittings.
•
Never look in the valve when it is opened.
•
Always use cylinder caps when it is possible
Maintenance:
WARNING
•
Always disconnect power before carrying out maintenance on the equipment.
•
Do not touch the PCB without wearing an anti-static wrist strap. The PCB must be
stored in an antistatic bag when moving it or when shipping it by post.
•
Do not touch moveable parts, e.g. the fan’s drive roll.
