www.pmlighting.com
info@pmlighting.com
INSTALLATION INSTRUCTIONS
pg.
6
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY
TO PERSONS IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION GUIDELINES – STAKE MOUNTED MODEL
Save these instructions!
For use with Low Voltage Landscape Lighting Power Units. FOR OUTDOOR USE ONLY.
Amperage not to exceed 25 AMPS per circuit
Voltage not to exceed 15 VOLTS per circuit
Warning:
Luminaire must be installed in accordance with the National Electric Code (NEC) and all Local Codes. Failure
to comply with NEC and/or Local Codes may cause serious injury and could destroy the luminaire. Failure to comply
with NEC and Local Codes will void all warranties.
Safety Warning:
LAMP IS HOT WHEN LUMINAIRE IS ON! Hot lamp creates risk of fire and injury to persons. Keep away
from combustibles. Lamp gets hot very quickly. Turn off or unplug luminaire and allow lamp to cool to change bulb.
Do not touch lamp with bare hands. When using this fixture with high wattage halogen lamps (35W MAXIMUM), keep
luminaire away from children as luminaire may become VERY HOT. Do not install luminaire within 10 feet (3.05
meters) of a pool, spa, fountain, or pond. Do not cover or bury luminaire and keep luminaire clear of debris. Use only
UL compliant components including low-voltage power units, cable, wire connectors, and any other component
necessary.
CAUTION: Luminaire is NOT submersible!
NOTE: Do not exceed the maximum wattage rating or maximum amperage rating of the power unit (transformer)
used when installing multiple luminairies.
1.
Disconnect or unplug transformer from power source.
2.
This style of Directional Light is a complete luminaire and designed to be
mounted on a ground stake.
3.
Drive the ground stake into the ground at the desired location and depth
(see “B”) with the included installation driver tool.
4.
Connect the matching male and female terminals on the ground stake and
luminaire, slide the socket onto the ground stake and secure the position
desired using the brass screws on the adjustable knuckle.
5.
Connect the wire terminals to the main lead to the transformer using
included Quick Connect lead connectors.
6.
Cable may be buried if desired to a maximum depth of 6 inches
underground.
7.
Do not exceed 12 Volts at the luminaire.
8.
Recommended Lamp: 5W MR16 LED
Professional
Series
CS937-LED Directional Lights
pg. 5
