www.pstechnik.de
16
4.
Setup
4.1.
Setting the Control Unit
The Control Unit can be mounted on the left side or right side of the camera.
For remote control the PS-Cam X35 Control Unit can be connected with a
cable to the camera (planned).
Necessary tool: Metric Allen Key size 3.0
4.1.1.
Removing
1. Unscrew the cover (one screw)
and remove it
2. Unscrew the Control Unit and
remove it.
NOTE: The two screws are hidden!
To reach the screws put the Allen
Key into the marked holes in the
Control Unit and unscrew them.
4.1.2.
Setting
1. Place the control unit in the housing gently. Verify the connector on the
backside slides into the housing correctly. Fasten the screws.
2. Place the cover in the housing of the camera. Fasten the screw.
4.2. Connecting the power supply or battery
NOTE: The power supply should provide at least 78 Watt and a Voltage of
12 V - 24 V. Do not use a power supply with a higher Voltage, otherwise you
will damage the PS-Cam X35.
