www.pstechnik.de
28
Rec.Mode
Pressing the “Rec.Mode” line, a window opens, showing five different “re-
cord modes”. Once a mode is selected, it is applied and the window closes
automatically.
- Sequence
In this mode, the entire internal camera´s RAM memory is used for recording.
When the memory is full, the recording will stop automatically.
Example:
Possible recording length with the RAM at 150 fps: 20 seconds.
20 seconds after being started, the recording stops automatically.
- Ring Buffer
The entire internal camera´s RAM is written continuously. The recording ends
only when is stopped manually. Image data that goes beyond the possible
RAM´s recording length is overwritten by new image data.
Example:
Possible recording length to RAM at 150 fps: 20 seconds.
Once started, recording continues until it is stopped manually.
The last 20 seconds of the recording time are saved.
- Direct Recording
In this mode you can record directly to an external recorder without doing
a recording to the RAM first and then do a playout. The recording speed is
limited to the format chosen. The longest shutter is also limited to certain
values. Choosing a shorter shutter is always possible.
- Trigger 30/70, 50/50, 70/30
In this mode you can make a decision how much percent of the recordable
frames will still be recorded after you pressed the stop button. With this
mode you make sure that you get a certain amount of frames before and
after pressing the stop button and not loosing anything important.
Example:
You choose Trigger 30 / 70. A recording is started and is running as long
a you want (like in the Ring Buffer Mode). As soon as you press the stop
button the trigger mode is active and the recording will stop after recording
30% more of the recordable frames. So you have 70% of the action before
you pressed the stop button and 30% of it after you pressed it. In the other
modes only the percentage differs.
Segment
Divide the RAM into different segments to record to with this function. Ev-
ery segment may relate to different settings to be saved by the Control Unit.
Playback of every separate segment is possible at any time, you just need to
select the concerning segment.
The following segmentations can be selected:
- 1 Segment 100%
Image Process
- Film mode: increased image quality by the dark reference function. The
recording capacity is decreased to 50%. Film mode is not supported by dual
