D|4
Hand Unit
Connect the Hand Unit with the camera. Use only the cables
delivered by P+S Technik.
Mount the Hand Unit on the camera with the delivered brack-
ets, if needed.
Turn on the Hand Unit
The green LED
STANDBY
lights up
->
If
REC
is lighting, press the green
Start / Stop
button to
turn the Hand Unit into
STANDBY
mode
->
If the blue
LIMITS
LEDs lights up, erase the limits and
turn the Hand Unit into
STANDBY
mode.
Hand Unit Settings
P -
Records while green
START / STOP
button is pushed down
L -
Set and erase Limits
C -
Continous recording after green
START / STOP
button is pu-
shed once, push again to stop recording
->
To set Limits
Move the Limit Stops to the appropriate positions
Turn the wheel to Limit 1
Press the blue
SET LIMITS
button until the blue light is lit
continuously.
Move the wheel to Limit 2
Press the blue
SET LIMITS / JUMP
button until the second
blue light is lit continuously.
You now have set your Limit 1 and Limit 2. A limit can be the
one with the higher value, for ex. Limit 1 is 500 fps and Limit
2 is 100 fps - just set the higher value first.
Set the Hand Unit Program Switch to
C
for continuous re-
cording
Press
START
and you are now recording with the fps of
Limit 1
Press the blue
SET LIMITS / JUMP
and the recording
speed jumps to the frame rate set for Limit 2 and records in
this speed until you release the blue button.
Release the blue button and you are now recording again
with the frame rate set for Limit 1
Press
START / STOP
to stop recording
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Summary of Contents for Weisscam HS-1
