Bite Point Setup Procedure
At any moment, it is possible to fine tune the bite
point following this procedure:
Note: The set value corresponds to the right paddle,
meaning that for a setup of 80%, the right paddle is
acting up to 80% on the clutch release.
Push simultaneously buttons 15 and 16 for 3 seconds
Setup mode appears on LEDs bar
Rotate rotary X to select the right setup
Push simultaneously buttons 15 and 16 for 3 seconds
to exit setup
25%
80%
50%
Selected setting
1
1
2
3
3
2
4
EN
Summary of Contents for P1- Eau Rouge
