Page
10
of
14
Copyright © 2015 P2 Wireless Technologies Limited. All rights reserved.
WIRELESS ACCESS POINT USER MANUAL
Configuring and Monitoring the Access Point
The web-based configuration and monitoring platform, MeshProvision Server, is specially designed for the
P2 wireless network architecture including Z100. You can configure and monitor the entire network right
from your fingertips in a centralized manner, and from anywhere in the world.
Unlike a WLAN controller (or so-called access controller), the MeshProvision Server is NOT required to be
running for the wireless network to operate. In other words, it can be shut down without affecting the
wireless network at all. Therefore, it will never be the Single-Point-Of-Failure by any means.
The Z100 supports traffic monitoring, configuration broadcast, map configuration and email notification
for an easy and convenient approach of network deployment and maintenance. These functions should be
performed with the MeshProvision Server.
For more details on how to configure and monitor the Z100, please refer to the MeshProvision Server User
Guide.
