25
It can be seen from this that, depending on the ratio of temperature to humidity,
there are clearly bounded areas, which are defined as a comfortable or an
uncomfortable climate. Hence, one finds a humidity level of 30% at a temperature
of 77
°
F, for example, to be too dry (e.g. heating air) and one above 60% to be
sultry.
10. Intended usage, exclusion of liability,
safety instructions
- This weather station is intended for domestic use as an indicator of future weather.
The forecasts of this device are to be considered guidelines only and do not in
any way constitute absolutely accurate predictions.
- The manufacturer of this weather station accepts no responsibility for incorrect
measurements and the consequences arising therefrom.
- This weather station is not suitable for medical purposes or public information
display.
- The components of this weather station are not toys! They contain breakable
glass and small parts. Erect all components in such a way that they are out of the
reach of children.
11. FCC Information
FCC ID: RNT-WS300US
Changes or modifications not expressly approved in writing by ELV Electronics
Limited may void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
