background image

P3 INTERNATIONAL CORPORATION   

LIMITED WARRANTY 

 

P3 INTERNATIONAL CORPORATION ("P3") warrants to the original retail purchaser only, that its product is free from defects in material or 
workmanship  under the condition  of normal  use and  service for a  period of  six  (6) months from the date  of purchase.    In the e vent that a 
defect,  malfunction  or  failure  occurs  or  is  discovered  during  the  warranty  period,  P3  will  repair  or  replace  at  its  option  the  product  or 
component part(s) which shall appear in the reasonable judgment of P3 to be defective or not to factory specifications.    A product requiring 
service is to be returned to P3 along with the sales receipt or other proof of purchase acceptable to P3 and a statement describing the defect 
or malfunction. All transportation costs shall be borne by the owner and the risk of loss shall be upon the party initiating the transportation. All 
items repaired or replaced thereunder shall be subjected to the same limited warranty for a period of six (6) months from the day P3 ships the 
repaired or replaced product.    The warranty does not apply to any product that has been subject to misuse, tampering, neglect, or accident or 
as a result of unauthorized alterations or repairs to the product.    This warranty is void if the serial number (if any) has been removed, altered, 
or defaced. This warranty is in lieu of all warranties expressed or implied, including the implied warranties of merchantability and fitness for a 
particular purpose which are expressly excluded or disclaimed. P3  shall  not be responsible for consequential,  incidental or other damages, 
and  P3  expressly  excludes  and  disclaims  liability  for  any  damages  resulting  from  the  use,  operation,  improper  application,  malfunction  or 
defeat of any P3 product covered by this limited warranty. P3's obligation is strictly and exclusively limited to the replacement or repair of any 
defective product or component part(s).    Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 
above  limitation  or  exclusion  may  not  apply  to  you.    P3  does  not  assume  or  authorize  anyone  to  assume  for  it  any  other  obligation 
whatsoever.    Some states do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you. It is 
the  owner/user's  responsibility  to  comply  with  local,  state,  or  federal  regulations,  if  any,  that  may  pertain  to  P3  products  or  their  use.  This 
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.   
 
If you experience difficulty in the operation of your unit, or if your unit requires repair please contact:   
 
P3 INTERNATIONAL CORPORATION   
TECHNICAL SUPPORT 
Tel: 212-741-7289   
Fax: 212-741-2288   
 
Email: 

techsupport@p3international.com   

 
Rev. 0110   

Shop for P3 products online at:

1.877.766.5412

www.

PowerMeterStore

.ca

Summary of Contents for Kill A Watt PS













Reviews: