background image

Safety Instructions 

 

Read Instructions

 

– All the safety and operating instructions should be read before the product is operated.   

Retain Instructions

 

– The safety and operating instructions should be retained for future reference.   

Heed Warnings

 

– All warnings on the product and in the operating instructions should be adhered to.   

Follow Instructions

 

– All operating and use instructions should be followed.   

Cleaning

 

–  Unplug  this  product  from  the  wall  outlet  before  cleaning.  Do  not  use  liquid  cleaners  or  aerosol 

cleaners.   

Attachments

 

–  Do  not  use  attachments  not  recommended  by  the  product  manufacturer  as  they  may  cause 

hazards.   

Water and Moisture

 

– Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, 

or laundry tub; in a wet basement; or near a swimming pool and the like.   

Accessories

 

– Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, 

causing serious injury to a child or adult and serious damage to the product. Any mounting of  the product should 
follow the manufacturer’s instructions.   

Ventilation

 

– Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the 

product  and  to  protect  it  from  overheating,  and  these  openings  (if  any)  must  not  be  blocked  or  covered.  The 

openings (if any) should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This 

product  should  not  be  placed  in  a  built-in  installation  such  as  a  bookcase  or  rack  unless  proper  ventilation  is 
provided or the manufacturer’s instructions have been adhered to.   

Power Sources

 

– This product should be operated only from the type of power source indicated on the marking 

label. If you are not sure of the type of power supply to your home, consult your product dealer or local power 

company.  For  products  intended  to  operate  from  battery  power,  or  other  sources,  refer  to  the  operating 

instructions.   

Grounding or Polarization

 

– This product may be equipped with a polarized alternating-current line plug (a plug 

having  one  blade  wider  than  the  other).    This  plug  will  fit  into  the  power  outlet  only  one  way.  This  is  a  safety 

feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to 

fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.   

Shop for P3 products online at:

1.877.766.5412

www.

PowerMeterStore

.ca

Summary of Contents for Kill A Watt PS













Reviews: