P3 International P0270, Operation Manual

Minimum/Maximum temperatures

● 

The highest temperature and humidity values since the last reset 

can be displayed by pressing the Min/Max button on the right side 

of the Mold Alert.

● 

The lowest temperature and humidity levels since the last reset, 

can be displayed by pressing the Min/Max button a second time.

● 

The current values can be shown again by pressing the Min/Max 

button a third time.

● 

The reset key is located above the Min/Max button on the right 

side of the unit and is used to reset Min/Max values when they 

are displayed.

if humidity levels are high

● 

To lower humidity, you can open windows or put a fan in the area 

to better ventilate it, which may prevent mold growth. 

● 

If there is moisture or a water leak, mold growth may have 

occurred. This mold can cause health problems and the sooner 

you detect it, the more likely you are to be able to control it. 

● 

If you suspect that you have a mold problem, and the remedies 

outlined in this manual prove to be insufficient, please contact a 

mold control professional.

if humidity levels are low enough

The area in which you have placed the unit is safe from mold growth, 

however the Mold Alert thermo-hygrometer is a useful product to have 

in any home due to its accurate measurements of temperature, dew 

point, and humidity.

  MAintenAnce

● 

Do not expose the Mold Alert to extreme temperatures, vibration, 

or shock. 

● 

Clean the unit with a soft damp cloth. Do not use solvents or 

scouring agents. 

● 

Replace batteries if the unit stops working.