Display Panel:
LCD Display
With Backlight (Orange LED)
Soft function key
Weekly Day Icon
Program Setting Indicator
Low Battery Icon
AM/PM Icon
Back Light Icon
Random mode Icon
Holiday Mode Icon
Over Temperature Indicator
Installation:
1. Using the appropriate flat screwdriver open the battery cover, and position the 3 (AAA) batteries according to the
+/- terminal. When the batteries are in place, press the battery cover back into its original position.
Now you can
operate the unit by battery power, allowing full programming of the unit without needing to plug it into the
wall.
2. Turn off the appliance before connection to the unit and remove the power cord from the outlet. Connect the Save
A Watt
™
HD unit to the outlet and appliance to the unit.
3. The main display of LCD will be flashing in
Clock
mode. This is normal when the unit is connected for the first
time to power, please refer to
Clock
mode to set the clock time.
4. Press the
ON
key, and turn the appliance back on and confirm normal operation. If the appliance does not
function, please recheck your installation.
ON, OFF and Auto key function:
1. Pressing the
OFF
key will turn off power to the outlet at once. The
OFF
key will illuminate in red, and the function
keys and LCD display will continue to operate.
2. Pressing the
ON
key will turn power on to the outlet at once. The
ON
key will illuminate in green. The unit features
a spike-free switch function which activates at zero-crossing and will present clean power to your connected
appliance, and the function keys and LCD display will operate.
3. Pressing the
Auto
key activates
Auto
mode. The
Auto
key will illuminate in orange. The unit will automatically
turn ON or OFF according to the
Program
. If the
Program
is ON, the unit will switch ON at once no matter what
the previous state was. If the
Program
is OFF, the unit will switch OFF at once no matter what the previous state
was.
4. When pressing the ON or OFF key, the output will be switched to on or off accordingly, but the Auto key stays lit
and the
Program
continues to control the output, the next
Program
event (on or off) is the next time that the
on/off state is changed.
5. Pressing the
Auto
key again to
Manual
mode can disable auto on or off function and
Auto
key LED will be dark.
You can switch the outlet on or off manually using the ON and OFF keys.
6. Pressing and holding the
OFF
or
ON
key for 2 seconds, will switch the output off or on accordingly, This activates
the
Manual
mode as well and will disable the auto on or off function and the
Auto
key LED will be dark. You can
switch the outlet on or off manually using the ON and OFF keys.
Remark
:
A flashing display segment indicates this item can be edited or changed.
