OPERATION VOLTAGE IS LIMITED TO
±
10% OF LINE VOLTAGE
POLLUTION DEGREE : 2
CAT II
GENERAL SPECIFICATION
POWER RATING
120 Vrms
±
10%, 50/60Hz
POWER CONSUMPTION
Max. 2.1 Watt
Ratings
15Amp (1800 Watts) Resistive and Inductive,
500 Watts Tungsten, 1/3 H.P. 120V.A.C.
L/W/H
5½ x 3⅛ x 1⅞
WEIGHT
Around 7.4 oz.
Trouble Shooting:
Item
Symptoms
Action
Description
1
The main display is flashing when
the unit first time connected to the
wall outlet.
Clock setting
This normal operation, Clock is not
setup yet.
2
LCD show low battery icon
Battery replacing
This is a low battery warming signal.
3
No display in the LCD, no response
from pressing keys.
1. Check that the unit connected to
an energized AC wall outlet or
battery.
2. Request technical support.
When the unit is not connected to an
energized AC power and no power
of battery, it shall be no display in
the LCD, no response from pressing
keys.
Or
something
defective
internally.
Maintenance
Protect the meter from adverse weather conditions. The Timer is not waterproof. Do not expose the LCD
display to direct sunlight for long periods of time.
CAUTION: To avoid damage to the meter, do not expose it to sprays, liquids, or solvents.
Clean the exterior of the meter by removing dust with a lint-free cloth.
Use care to avoid scratching the clear plastic display filter.
For further cleaning, use a soft cloth or paper towel dampened with water. You can use a 75% isopropyl
alcohol solution for more efficient cleaning.
CAUTION: To avoid damage to the surface of the Timer, do not use abrasive or chemical cleaning agents.
*Specifications subject to change without notice.
