- 4 -
Power Source
The amplifier is fixed at 230V AC. It depends on the territory main voltage.
Battery Connection (24Vdc)
When using external batteries, earth the amplifier via the screw terminal because of the high
voltage present.
Electrical stability of the system will be improved by providing a good earth ground.
NOTE: the connection cable must be fitted with an in-line fuse - q
uick blow type
8
A (60V). When
connecting batteries please ensure correct polarity.
Mains Connection
Microphone Connection
Mic1 ~3 is XLR balanced Jack.
Mute Function
Mic1 input has VOX priority over all other inputs.
Line (Aux/CD) Connection
The equipment provides 3 auxiliary inputs, which may be used for connecting other signal
sources such as a Radio Tuner, CD or Cassette player. The AUX input sockets are standard stereo
RCA Jack. The line level Control on the front panel operates on each of the input sources.
RCA plug connections
Sleeve-Screen
SLEEVE
PIN
Pin- Signal
Loudspeaker Connection
For 100V or 70V Line Loudspeaker
Please use only one 100V or 70V (Selectable) Line Loudspeakers
For Low Impedance 8
Ω
or (4
Ω
):
This output allows connection of standard low impedance loudspeakers. The minimum impedance
must be 4
Ω
. When two or more loudspeakers are in use, ensure that they are wired in such a way
that the impedance load is between 4
Ω
and 16
Ω
.
