2-4
Chapter 2: Hardware Installation
Assembling the Rack Ear Mount Kit
To assemble the rack ear mount kit:
1.
Determine the position where the enclosure will be installed to the front and rear rack posts, then
insert the cage nuts into the designated holes on the front rack posts.
Front rack post
Rear rack post
2.
Install the fixed rails to the rear rack posts using the truss head screws.
9.0 mm M5
3.
To install the enclosure to the rack ear mount, this requires an assistance of another person. While
one person holds the enclosure at the installation height, the other person secures the enclosure
using two 25 mm M5 or M6 or 25.4 mm no. 10-32 screws at the front and eight no. 6-32 screws on
the side panels, four on each side.
No. 6-32 screws
25 mm M 5 or
25 mm M6 or
25.4 mm No. 10-32 screws
