INLINE MOUNT Exhaust Brakes
I N S T A L L A T I O N M A N U A L
- L 2 0 3 1
P G . 4
6
Prior to mounting the compressor, attach the air filter to the
intake port and firmly tighten by hand. Attach the rubber
mounting feet to the compressor mounting brackets using
the grommets and grommet sleeves provided. These will
isolate the compressor from vibration
NOTE: A remote breather kit for compressor intake air
must be used if dust or road spray is present near the
air intake filter. Pacbrake P/N C11620 is available and
must be ordered separately. (shown in diagram)
7
Route the Teflon air hose from the compressor assembly to
the fitting on the air cyclinder.
Cut the hose and make the connection, being careful that the
hose is secured away from any heat that could damage it.
Summary of Contents for Inline Mount
Page 1: ......
