17
AUXILIARY RIGGING
Snatch Block
An auxiliary sheave, or snatch block, may increase the
versatility of the winch, and is highly recommended in the
following applications:
• When fl eet angles exceed 1½°.
• When winch loads exceed the safe winch or wire rope
capacity.
• When slower line speeds are required for precise load
control.
Securely attach the snatch block to the anchor point fol-
lowing the block manufacturer’s recommendations.
Tree Protector
If the wire rope or a snatch block must be anchored to a
tree or other structure for recovery purposes, a heavy ny-
lon web sling of proper capacity rating should be used to
avoid causing serious damage to the tree.
OIL DRAIN
-8 O-RING PLUG
MOTOR DRAIN PORT
SAE -4 JIC
HOIST PORT
SAE -16 O-RING
BOSS PORT
12 DC SHIFT SOLENOID VALVE
FOR 2-SPEED OPERATION
HOIST
OIL LEVEL
-8 O-RING PLUG
LOWERING PORT
SAE -16 O-RING
BOSS PORT
OIL FILL & VENT
-8 O-RING PLUG
CLUTCH DISENGAGE
PORT
CLUTCH ENGAGE
PORT
BRAKE ENGAGE
PORT
A poorly attached or undersized snatch block may break
loose from the anchor point and cause a sudden loss of
load control, which may result in property damage, in-
jury or death.
NOTES:
1. OIL CAPACITY: 12.5 PTS.
2. 1.25 CABLE FERRULE (29429) SUPPLIED WITH WINCH. FERRULES
FOR OTHER CABLE SIZES MAY BE PURCHASED SEPARATELY.
1.00 CABLE FERRULE (29427)
1.13 CABLE FERRULE (29428)
3. MAXIMUM AIR PRESSURE OF 130 PSI FOR CLUTCH AND BRAKE
CYLINDER.
Summary of Contents for BRADEN HP125B
Page 2: ...2...
