NANO 1000S Polisher
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com W eb: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
33
Polishing:
Abrasive / Surface
Lubricant
Force /
Sample
Speed
(Head /
Base)
Time
Individual
Force
Mode
Central
Force Mode
120 grit SiC paper
240 grit SiC paper*
Water
5
– 10 lbs.
200 / 200
rpm
Planar
1-min
N/A
Abrasive / Surface
Lubricant
Force /
Sample
Speed
(Head /
Base)
Time
Individual
Force
Mode
Central
Force Mode
360 grit SiC paper
600 grit SiC paper
800 grit SiC paper
1200 grit SiC paper
Water
5
– 10 lbs.
200 / 200
rpm
1-min
Sectioning:
MAXCUT Abrasive Blade (Cat. No. MAX-D or MAX-I series)
Mounting:
Compression Mounting with Phenolic, Epoxy or Diallyl
Phthalate compression mounting resins.
*Required for central polishing force