2
RECEPTIOn.SCREEn
On this screen you must select the method
you have used to connect your set-top box to
your satellite dish(es), and select the associated
satellite(s) .
First, use the
L R
buttons to display the
connection method you have used:
•
Single LNB
•
Bi-head Tone Burst
•
Bi-head DiSEqC
•
Tone Burst 2 Inputs
•
2-input DiSEqC switch
•
4-input DiSEqC switch
•
DiSEqC motor
Then, use the
U D
buttons to highlight the
satellite(s) you want to change . Use the
L R
buttons to display the satellite name you want .
note: If you have a DiseqC motor system, you
must also choose your location (for example,
country and city). You can also press the red
button to search for a satellite.
GettInG stARteD
ImPoRtAnt: If you are uncertain about any
of the settings you wish to make, consult a
competent installer of satellite dishes.
Press the
oK
button to save your settings .
The Reception quality screen appears .
This screen indicates whether or not your
installation is correct, and the signal quality being
received by the tuner . If you need to go back to the
previous screen to change the settings, press
exIt
.
Or, press
oK
to continue .
