24
Plug in the set-top box
Use the power adapter included in the container to provide AC power to the set-top
box.
To connect the set-top box to a power supply:
1.
Insert the 12 volt connector into the POWER connector on the set-top box.
2.
Insert the AC power adapter into an AC electrical outlet.
3.
Verify that the LED on the AC power adapter lights green when the set-top box is
receiving power from the wall outlet.
Connecting to the AC power supply
To avoid possible damage to the set-top box or to a connected TV or component, all
AC power cords must be plugged into properly wired outlets. As with all electrical
products, connection to faulty or defective components, or the failure to connect the
apparatus to a properly wired outlet, may cause sparking, property damage, or
damage to any TV or other component connected to the apparatus and pose a fire
hazard.
If you are in any doubt about the power supply lead, its plug or its connection, or are
not certain that the electrical outlets you are using are properly wired and grounded,
consult a qualified electrician before proceeding any further.
Y
Pb
Pr
OPTICAL
NETWORK
R
L
AUDIO
VIDEO OUT
WPS
Set-top box
Power supply unit
AC electrical
outlet
Summary of Contents for IPW8000
Page 1: ...BRINGING TECHNOLOGY HOME www pace com INSTALLATION GUIDE HD IPTV Set Top Box IPW8000 ...
Page 2: ......
Page 31: ......
