Temperature Setback Operation
2.
For any individual channel, the attached handpiece may be disconnected and reconnected. The
previously stored Set Tip Temperature will be restored as in method #1, but the Tip Offset Constant
value will change to the default value of "3" for °C ("6" for °F).
To exit Temperature Setback Mode for all channels, do either of the following.
3.
Press and hold the Scroll Down Key; press the Scroll Up Key. Release both keys. This is the preferred
method.
4.
Method "3" is preferred but you can turn the POWER Switch "OFF" (0) and then back "ON" (1). Set
Tip Temperature and Tip Offset Constants will be simultaneously restored on all channels.
46
