For more information on the MG1 or any other Pace product
please visit our website www.pace.com/americas
MG1-1113-1
This specification is subject to change without notice
MG1 Multi-Tuner Video Gateway
Technical Specifications
Pace Americas, Inc.
3701 FAU Blvd, Suite 200, Boca Raton, FL 33431
Tel: 561-995-6000 Fax: 561-995-6001
Pace and are trade marks and/or registered trade marks of Pace plc.
RF Interfaces
1 x Full Band Capture tuner with 1 GHz support
1 x OOB Agile tuner
1 x RF return, 5-85MHz QAM, QPSK modulator
1 x RF out Ch. ¾ remod
1 x MoCA 2.0 transceiver
DOCSIS Cable Modem
DOCSIS 3.0 Cable Modem
8 downstream x 4 upstream bonded channels
Audio Video Processing
HDMI capture
Video encoder support up to 1080p60
MPEG-2 MP@MP and MP@HL decode up to 1080p60
MPEG-4 MP@SP L3 and MP@ASP L5 decode
up to 1080p60
Simultaneous HD output via HDMI and Y Pb Pr outputs
with HD video downscaled to SD on CVBS output
Dual Transcode
Interfaces (Back Panel)
1 x HDMI 1.4 Audio/Video out with HDCP copy
protection
Dual switched HDMI inputs
Component Video RCA output (Y, Pb, Pr)
Composite Video Output
L/R RCA Stereo Output
5.1 Dolby Digital Optical Output S/PDIF
5.1 Dolby Digital RCA output
2 x USB 2.0 ports
1 x 10/100 Ethernet port
SD card slot for Time Shift Buffer
eSATA port for external HDD support
Optional IEEE 1394 port
System Processor / Memory
3000 + Dhrystone MIPS processor
256MB Flash
1GB DDR3 SDRAM
Removable 500GB hard disk drive (expandable to 2TB)
Graphics
Enhanced 3D graphics with support for
Open GL ES 2.0 and Open VG 1.1
Graphics presented on HDMI, Y, Pb, Pr, CVBS
outputs simultaneously
Front Panel
LED clock, channel Display
Record LED (RED)
Data LED (ORANGE)
Remote LED (Green for RF remote, Red for IR Remote)
Power (Green for ON, Red for OFF)
Remote Control Protocols Supported
Legacy and XMP-1 standard code set support
RF4CE RF remote control support
Conditional Access
Multistream CableCARD (M-Card) support
CableCARD located behind a bottom mounted metal
cover for heat dissipation
Software
Middleware and UI agnostic
Accessories
Consumer Quick Start Guide
12V DC External Power Supply
Industrial Design
Conventional horizontal set-top orientation
Enclosure combining plastic front, side, lid panels with
metal base for thermal efficiency purposes
