manualshive.com logo in svg

Pace TF-1800, Manual

The Pace TF-1800 user manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and valuable insights on how to use and maximize the features of your Pace TF-1800. Simply visit 88.208.23.73:8080 to access the manual and unlock the true potential of your product.

Share
Download
background image

©2016 PACE Inc., Vass, North Carolina, 

All Rights Reserved                                                                                                         

 

Page 

1  

TABLE OF CONTENTS 

 
 

Safety ........................................................................................................................................................ 1 
Specifications............................................................................................................................................ 1 
Packing Lists............................................................................................................................................. 2 
Hardware Overview and Identification .................................................................................................... 4 
Set up ........................................................................................................................................................ 5 
Software Overview ................................................................................................................................... 6 

The Profiler Screen (Production Mode) ............................................................................................... 1 
The Profiler Screen (Developer Mode) ................................................................................................ 8 
The Component Alignment Screen .................................................................................................... 10 
The Setup Screen ................................................................................................................................ 12 
The Debug Screen............................................................................................................................... 14 

Operation ................................................................................................................................................ 16 

General Overview ............................................................................................................................... 16 
Procedure ............................................................................................................................................ 17 

Production Mode ............................................................................................................................ 17 
Developer Mode ............................................................................................................................. 18 
Small Components.......................................................................................................................... 20 

Maintenance............................................................................................................................................ 21 
Replacement & Spare Parts .................................................................................................................... 22 
Warranty ................................................................................................................................................. 23 

 
 
 
 
 
 

 
 

WARNING 

Read the safety & setup information sections in this manual before 

installing and using your new rework system. 

Summary of Contents for TF-1800


























Reviews:

No comments

Related manuals for TF-1800

Vivo DESK-V000VC Instruction Manual preview
DESK-V000VC
Brand: Vivo Pages: 3
REGEN-i BK-200S User Manual preview
BK-200S
Brand: REGEN-i Pages: 6
Hakko Electronics 850D Instruction Manual preview
850D
Brand: Hakko Electronics Pages: 19
jbc AM 6500 Instruction Manual preview
AM 6500
Brand: jbc Pages: 29

Brands by name

Popular brands

Load more brands