16
THE PACEMASTER BRONZE BASIC CONTROL PANEL
Although your PaceMaster has many advanced features to provide versatility in meeting exercise needs, basic operation is extremely
easy. Basic operation involves setting your TIME and SPEED goals, then pressing the START button. Your PaceMaster will gradually
accelerate to the set speed, maintain that speed until the timer counts to zero and then gradually come to a complete stop. During your
exercise, your time remaining, current speed, distance traveled, calories burned and Aerobic Points earned are displayed.
WARM UP
COOL DOWN
SELECT
MAGNETIC SAFETY KEY
- The MAGNETIC SAFETY KEY, with its red cord and garment clip, is an important safety feature. It is also the
ON/OFF switch. To power up your treadmill, first attach the garment clip to your clothing at waist level then insert the magnetic key into
the round recess on the control panel. This safety key provides a means of powering down the treadmill in an emergency situation. This
treadmill will not operate unless the MAGNETIC SAFETY KEY is engaged. During exercise, an emergency stop can be made at any time
by pulling on the cord to release the key from its slot
.
CAUTION: Using the key to stop the treadmill is an emergency procedure only!
To end your exercise routine normally, press
the STOP button or allow the timer to count down to zero. Once the belt has come to a complete stop, remove the MAGNETIC SAFETY
KEY to turn off the treadmill. When not in use, store the MAGNETIC SAFETY KEY
in a safe place to prevent unauthorized use.
BUTTON DEFINITIONS
INCLINE
▲
and
▼
buttons –
Have two functions. 1) Use these buttons to adjust the user weight. 2) These buttons increase or
decrease incline to simulate exercising up hill. Incline can be changed at any time during your workout. At the end of your
workout, the Incline setting will automatically return to 0%.
SPEED + and
−
buttons –
Use these buttons to increase or decrease Speed. Adjust your speed at any time during your main
workout. The treadmill computer controls the speed during the warm up and cool down phases of your workout.
START (QUICK) button –
Press this button to start your workout or to return from a paused state.
STOP (RESET) button –
Press this button to end your workout. If pressed when the treadmill is stopped it will reset the
display.
bron
uSA
