2. Install the Right & Left Pedals
Step 2A:
The pedals are stamped on the threaded end of the
axle with the letter “R” and “L” for Right and Left
respectively. Right and Left sides are determined
as you would use the Exercise bike. Install the
Right pedal (1B) on the Right crank arm using the
included wrench (79) or a 15 mm wrench. Install
the Left pedal on the Left crank arm using the
included wrench (79) or a 15 mm wrench. NOTE:
The Left pedal is reverse thread (you must turn
it counter-clockwise to tighten it).
3. Install the Seat
Step 3A:
As shown to the Right, attach the rubber bumper
(4) to the back of the seat post, using screw (3).
Step 3B:
Pull the seat adjustment pin (46) downward while
sliding the Seat (54) on to the seat post. Pull the
seat adjustment pin (46) downward to slide the
seat forward or Backward, the tighten adjustment
pin (46) to secure seat into position.
10
Summary of Contents for Silver XSC
Page 28: ...Silver XSC 11 13 07 28...